Download Oppo Mobile Flash File

Android Firmware or Android Flash File ROM is the operating system that must be installed on a smartphone so that the smartphone is switched on and running all the features and applications. Android has become the best operating system software because of its compatibility and user-friendly nature.

Android phones and tablets are usually much more than operating systems like iOS, Ti zen, or Windows 10 Mobile. If you do not like the firmware installed by the device manufacturer on your Android device, you are free to replace it with your own custom firmware.

Android flash files are files that are added to the system or completely replace the system. You can make changes not only to flash files/system partitions but also to other partitions such as boot partition or user data.

Flashing Delete all your mobile data like

Settings
Google account
System and app data
Downloaded apps
Music
Pictures
All other user data

Select your Oppo Phone

What is the Stock ROM?

The android device comes equipped with a “stock ROM,” also known as the “stock firmware”. The stock ROM is the pre-installed operating system in your device. The stock ROM has limited functionalities that are defined by the phone’s manufacturer. If you want to add additional features to your device, you may need to resort to a custom ROM.

What is Android Flashing?

Android flashing means removing the stock firmware from the Android device and replacing it with the same version or any other version. You can flash your device with a recovery mode or flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues, and improve device performance.

Before Flashing

Charge the phone at least 50% without interrupting the flashing process with a low battery. Interrupting the firmware installation means bricking your phone.

Oppo Flashing with Recovery Mode

Android phones with Android 8 and above cannot flash with a lower version.

Step – 1

First, turn off your Oppo Android Mobile by holding down the power button.
After that, Hold the
- Volume Up + Power Button
- Volume Down + Power Button
Release all buttons, when the Logo is displayed.
Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
Then while holding down the Power button press and release Volume Up Button.
Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
Now a screen with NO and YES option will appear, with the volume buttons go to the YES option and press with the power button.
After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.

Locate Downloaded Firmware file from Storage

In this step, Download the Firmware Update file and move to Drive storage {Do not put the file in the folder}.
After that, Locate Downloaded Firmware Update file from Storage.
Now tap on the Firmware Update file and install it.
Finally, your device should boot to the new version.

Step – 2

Download the firmware file and move to SD Card storage.
Turn off your Oppo Android Mobile by holding down the power button.
After that, Hold the
- Volume Up + Power Button
- Volume Down + Power Button
Release all buttons, when the Logo is displayed.
Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
Then while holding down the Power button press and release Volume Up Button.

Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
Now a screen with NO and YES option will appear, with the volume buttons go to the YES option and press with the power button.
Once the reset is complete, you will be bounced back to the same recovery mode menu.
Then select Apply update from SD card option.
Now locate the downloaded firmware file from Storage.
After that, Tap on the firmware file and install it.
Your device will begin updating automatically.
After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
Finally, your device should boot to the new version.

If the above methods did not work, Follow this guide Hard Reset to wipe all data.

Exit Recovery mode

After you enter the Recovery Mode menu.
Use the volume buttons to select the Reboot system now option and press the power button to confirm.
After that, Your device will be rebooted automatically.
Now you have successfully exited Recovery mode

Flashing with Flash Tool

You can flash Oppo Android Phone Firmware with Flash tool. Here you can find detailed information about firmware flashing with Flash tool.

First download the flash file, flash tool, and USB drivers on your PC.
Now install the USB drivers for your Android phone.
Then launch the Flash tool on your PC.
In this step, switch off your Phone.
Then press and hold
- Volume Up and Power Button
- Volume Down and Power Button
Next, Connect your mobile to the PC with a USB cable.
Now browse the flash file in the flash tool and click on the download button.
Now flashing starts on your phone.
Flashing takes 10 to 20 minutes. Please wait until the flashing completed.
After flashing completed, Your device automatically rebooted.
Finally, Flashing done on your mobile and remove the phone from the PC.

Download Flash Tools

Download Android USB Drivers

Here you can Download and install Oppo Android Phone device USB (Universal Serial Bus) drivers for free.

Download USB Drivers

Android Phone HARD RESET
Android Phone UNLOCK
Android Phone FLASH FILE

Search Keywords :

Flash File Oppo
Oppo Factory Reset
Where can I get Oppo stock firmware File
how to flash Oppo
SP flash tool error
Oppo flashing
How to replace Oppo firmware
Download the Oppo phone Stock Firmware
Oppo Stock Firmware ROM (Flash File)
How to Flash Stock Firmware on Oppo
How to Download Firmware for Oppo phone
Update Software Latest for Oppo
Download Oppo USB Driver- All USB Drivers