Android Firmware or Android Flash File ROM is the operating system that must be installed on a smartphone so that the smartphone is switched on and running all the features and applications. Android has become the best operating system software because of its compatibility and user-friendly nature.
Android phones and tablets are usually much more than operating systems like iOS, Ti zen, or Windows 10 Mobile. If you do not like the firmware installed by the device manufacturer on your Android device, you are free to replace it with your own custom firmware.
Android flash files are files that are added to the system or completely replace the system. You can make changes not only to flash files/system partitions but also to other partitions such as boot partition or user data.
Flashing Delete all your mobile data like
- Settings
- Google account
- System and app data
- Downloaded apps
- Music
- Pictures
- All other user data
What is the Stock ROM?
The android device comes equipped with a “stock ROM,” also known as the “stock firmware”. The stock ROM is the pre-installed operating system in your device. The stock ROM has limited functionalities that are defined by the phone’s manufacturer. If you want to add additional features to your device, you may need to resort to a custom ROM.
What is Android Flashing?
Android flashing means removing the stock firmware from the Android device and replacing it with the same version or any other version. You can flash your device with a recovery mode or flash tool.
You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues, and improve device performance.
Before Flashing
Charge the phone at least 50% without interrupting the flashing process with a low battery. Interrupting the firmware installation means bricking your phone.
Wiko Flashing with Recovery Mode
Android phones with Android 8 and above cannot flash with a lower version.
Step – 1
- First, turn off your Wiko Iggy Android Mobile by holding down the power button.
- After that, Hold the
- Volume Up + Power Button
- Volume Down + Power Button
- Release all buttons, when the Logo is displayed.
- Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
- Then while holding down the Power button press and release Volume Up Button.
- Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
- Now a screen with NO and YES option will appear, with the volume buttons go to the YES option and press with the power button.
- After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
- In this step, Download the Firmware Update file and move to Drive storage {Do not put the file in the folder}.
- After that, Locate Downloaded Firmware Update file from Storage.
- Now tap on the Firmware Update file and install it.
- Finally, your device should boot to the new version.
Step – 2
- Download the firmware file and move to SD Card storage.
- Turn off your Wiko Iggy Android Mobile by holding down the power button.
- After that, Hold the
- Volume Up + Power Button
- Volume Down + Power Button
- Release all buttons, when the Logo is displayed.
- Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
- Then while holding down the Power button press and release Volume Up Button.
- Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
- Now a screen with NO and YES option will appear, with the volume buttons go to the YES option and press with the power button.
- Once the reset is complete, you will be bounced back to the same recovery mode menu.
- Then select Apply update from SD card option.
- Now locate the downloaded firmware file from Storage.
- After that, Tap on the firmware file and install it.
- Your device will begin updating automatically.
- After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
- Finally, your device should boot to the new version.
If the above methods did not work, Follow this guide Hard Reset to wipe all data.
Exit Recovery mode
- After you enter the Recovery Mode menu.
- Use the volume buttons to select the Reboot system now option and press the power button to confirm.
- After that, Your device will be rebooted automatically.
- Now you have successfully exited Recovery mode
Flashing with Flash Tool
You can flash Wiko Iggy Android Phone Firmware with Flash tool. Here you can find detailed information about firmware flashing with Flash tool.
- First download the flash file, flash tool, and USB drivers on your PC.
- Now install the USB drivers for your Android phone.
- Then launch the Flash tool on your PC.
- In this step, switch off your Phone.
- Then press and hold
- Volume Up and Power Button
- Volume Down and Power Button
- Next, Connect your mobile to the PC with a USB cable.
- Now browse the flash file in the flash tool and click on the download button.
- Now flashing starts on your phone.
- Flashing takes 10 to 20 minutes. Please wait until the flashing completed.
- After flashing completed, Your device automatically rebooted.
- Finally, Flashing done on your mobile and remove the phone from the PC.
Download Flash Tools
Download Android USB Drivers
Here you can Download and install Wiko Iggy Android Phone device USB (Universal Serial Bus) drivers for free.
Android Phone HARD RESET
Android Phone UNLOCK
Android Phone FLASH FILE
Search Keywords :
- Flash File Wiko Iggy
- Wiko Iggy Factory Reset
- Where can I get Wiko Iggy stock firmware File
- how to flash Wiko Iggy
- SP flash tool error
- Wiko Iggy flashing
- How to replace Wiko Iggy firmware
- Download the Wiko phone Stock Firmware
- Wiko Iggy Stock Firmware ROM (Flash File)
- How to Flash Stock Firmware on Wiko Iggy
- How to Download Firmware for Wiko Iggy phone
- Update Software Latest for Wiko Iggy
- Download Wiko Iggy USB Driver- All USB Drivers